{"title":"XRF Steering Components","description":"\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/Slide4.jpg?v=1755083975\"\u003e\u003c\/p\u003e","products":[{"product_id":"xrf-front-lower-left-driver-side-tie-rod-end-20-25-gladiator","title":"XRF Heavy Duty Left Driver Side Inner Tie Rod End for 2020-2025 Jeep Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eXRFs 2.5 ton upgrade provides increased strength, durability, and improved steering response, almost tripling the durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eUpgraded Chloroprene Rubber Duster Covers: Anti-ozone Test, Heat and Oil Resistance.\u003cbr\u003eBenefits: Extended lifespan and reduced maintenance needs. Exceptional performance and reliability.\u003cbr\u003eUpgraded High-Strength Composite Material Bearings: Precision Design for High Durability.\u003cbr\u003ePremium Cohesion \u0026amp; Lubricity Grease: Pre-packed for Optimal Performance.\u003cbr\u003eBenefits: Unmatched strength and durability. Enhanced corrosion resistance.\u003cbr\u003eUpgraded High-Strength Carbon and Alloy Steel Nuts: ASTM A563M Class 10 \u0026amp; SAE J995 Grade 8.\u003cbr\u003eBenefits: Improved heat and oil resistance. Smooth operation and reduced wear.\u003cbr\u003eUpgraded High-Strength Alloy Steel Ball Joints: ASTM Salty Spray for Special Coating Treatment.\u003cbr\u003eUpgraded High-Strength Carbon Steel Housing: ASTM Salty Spray for 240 Hours.\u003c\/p\u003e\n\u003cp\u003eReplaces DL112, 68258760AE\u003cbr\u003e\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":44915807519032,"sku":"XTJ102P","price":63.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/products\/XTJ102P.jpg?v=1744387084"},{"product_id":"upper-right-passenger-side-outer-tie-rod-end-20-25-gladiator","title":"XRF Heavy Duty Upper Right Passenger Side Outer Tie Rod End for 2020-2025 Jeep Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eXRFs 2.5 ton upgrade provides increased strength, durability, and improved steering response, almost tripling the durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eUpgraded Chloroprene Rubber Duster Covers: Anti-ozone Test, Heat and Oil Resistance.\u003cbr\u003eBenefits: Extended lifespan and reduced maintenance needs. Exceptional performance and reliability.\u003cbr\u003eUpgraded High-Strength Composite Material Bearings: Precision Design for High Durability.\u003cbr\u003ePremium Cohesion \u0026amp; Lubricity Grease: Pre-packed for Optimal Performance.\u003cbr\u003eBenefits: Unmatched strength and durability. Enhanced corrosion resistance.\u003cbr\u003eUpgraded High-Strength Carbon and Alloy Steel Nuts: ASTM A563M Class 10 \u0026amp; SAE J995 Grade 8.\u003cbr\u003eBenefits: Improved heat and oil resistance. Smooth operation and reduced wear.\u003cbr\u003eUpgraded High-Strength Alloy Steel Ball Joints: ASTM Salty Spray for Special Coating Treatment.\u003cbr\u003eUpgraded High-Strength Carbon Steel Housing: ASTM Salty Spray for 240 Hours.\u003c\/p\u003e\n\u003cp\u003eReplaces TR181, 68522992AA, 68522995AA\u003cbr\u003e\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":44920443928888,"sku":"XTJ101P","price":93.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/products\/XTJ101P.jpg?v=1744387859"},{"product_id":"lower-outer-tie-rod-end-20-25-gladiator","title":"XRF Heavy Duty Left Driver Side Lower Outer Tie Rod End for 2020-2025 Jeep Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eXRFs 2.5 ton upgrade provides increased strength, durability, and improved steering response, almost tripling the durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eUpgraded Chloroprene Rubber Duster Covers: Anti-ozone Test, Heat and Oil Resistance.\u003cbr\u003eBenefits: Extended lifespan and reduced maintenance needs. Exceptional performance and reliability.\u003cbr\u003eUpgraded High-Strength Composite Material Bearings: Precision Design for High Durability.\u003cbr\u003ePremium Cohesion \u0026amp; Lubricity Grease: Pre-packed for Optimal Performance.\u003cbr\u003eBenefits: Unmatched strength and durability. Enhanced corrosion resistance.\u003cbr\u003eUpgraded High-Strength Carbon and Alloy Steel Nuts: ASTM A563M Class 10 \u0026amp; SAE J995 Grade 8.\u003cbr\u003eBenefits: Improved heat and oil resistance. Smooth operation and reduced wear.\u003cbr\u003eUpgraded High-Strength Alloy Steel Ball Joints: ASTM Salty Spray for Special Coating Treatment.\u003cbr\u003eUpgraded High-Strength Carbon Steel Housing: ASTM Salty Spray for 240 Hours.\u003c\/p\u003e\n\u003cp\u003eReplaces TR182, 68309365AE, 68258761AE\u003cbr\u003e\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":44920454938936,"sku":"XTJ103P","price":93.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XTJ103P.jpg?v=1744379225"},{"product_id":"inner-tie-rod-end-0-25-gladiator","title":"XRF Heavy Duty Left Driver Side Outer Tie Rod End for 2020-2025 Jeep Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eXRFs 2.5 ton upgrade provides increased strength, durability, and improved steering response, almost tripling the durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects.   \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eUpgraded Chloroprene Rubber Duster Covers: Anti-ozone Test, Heat and Oil Resistance.\u003cbr\u003eBenefits: Extended lifespan and reduced maintenance needs. Exceptional performance and reliability.\u003cbr\u003eUpgraded High-Strength Composite Material Bearings: Precision Design for High Durability.\u003cbr\u003ePremium Cohesion \u0026amp; Lubricity Grease: Pre-packed for Optimal Performance.\u003cbr\u003eBenefits: Unmatched strength and durability. Enhanced corrosion resistance.\u003cbr\u003eUpgraded High-Strength Carbon and Alloy Steel Nuts: ASTM A563M Class 10 \u0026amp; SAE J995 Grade 8.\u003cbr\u003eBenefits: Improved heat and oil resistance. Smooth operation and reduced wear.\u003cbr\u003eUpgraded High-Strength Alloy Steel Ball Joints: ASTM Salty Spray for Special Coating Treatment.\u003cbr\u003eUpgraded High-Strength Carbon Steel Housing: ASTM Salty Spray for 240 Hours.\u003c\/p\u003e\n\u003cp\u003eReplaces DL111, 68258762AE \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":44920463032632,"sku":"XTJ104P","price":93.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XTJ104P.jpg?v=1744378365"},{"product_id":"adjusting-sleeve-20-25-jeep-gladiator","title":"XRF Heavy Duty Aluminum Front Upper Adjusting Sleeve for 2020-2025 Jeep Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eXRFs 2.5 ton upgrade provides increased strength, durability, and improved steering response, almost tripling the durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eReplaces TR184, 68522992AA, 68522995AA \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":44920474796344,"sku":"XTJ105","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XTJ105.jpg?v=1744376932"},{"product_id":"front-lower-adjusting-sleeve-0-25-jeep-gladiator","title":"XRF Heavy Duty Aluminum Front Lower Adjusting Sleeve for 2020-2025 Jeep Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eXRFs 2.5 ton upgrade provides increased strength, durability, and improved steering response, almost tripling the durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eReplaces DL114, 68309365AE, 68258761AE \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":44920483971384,"sku":"XTJ106","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XTJ106.jpg?v=1744376073"},{"product_id":"xrf-ball-joint-18-23-wrangler","title":"XRF Platinum Series Upper and Lower Ball Joints for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003eForged Ball Stud (SAE4140).\u003cbr\u003eSpecial Heat Treatment for Omin-directional Strength.\u003cbr\u003eTriple Lip Boot Seal.\u003cbr\u003eAnchored Bellows Boot Boot already installed on Ball Joint.\u003cbr\u003eSolid Steel Forging (SAE1045) For Double Strength.\u003cbr\u003eXRF Forged Ball Joints have almost double the Stud Pull-Out Rating of Competition.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces# 68531030AB\u003c\/p\u003e","brand":"XRF","offers":[{"title":"(1) Upper Ball Joint","offer_id":45308925804856,"sku":"11-01116","price":35.0,"currency_code":"USD","in_stock":true},{"title":"(1) Lower Ball Joint","offer_id":45308925837624,"sku":"11-01117","price":25.0,"currency_code":"USD","in_stock":true},{"title":"(1) Upper and (1) Lower Ball Joint","offer_id":45308925870392,"sku":"11-01115","price":60.2,"currency_code":"USD","in_stock":true},{"title":"(2) Upper and (2) Lower Ball Joints","offer_id":45308925903160,"sku":"11-01115-2","price":120.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/11-01115.jpg?v=1751412129"},{"product_id":"xrf-10-piece-front-end-kit-20-25-gladiator","title":"XRF 10 Piece Heavy Duty Front End Kit for 2020-2025 Jeep Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eXRFs 2.5 ton upgrade provides increased strength, durability, and improved steering response, almost tripling the durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eUpgraded Chloroprene Rubber Duster Covers: Anti-ozone Test, Heat and Oil Resistance.\u003cbr\u003eBenefits: Extended lifespan and reduced maintenance needs. Exceptional performance and reliability.\u003cbr\u003eUpgraded High-Strength Composite Material Bearings: Precision Design for High Durability.\u003cbr\u003ePremium Cohesion \u0026amp; Lubricity Grease: Pre-packed for Optimal Performance.\u003cbr\u003eBenefits: Unmatched strength and durability. Enhanced corrosion resistance.\u003cbr\u003eUpgraded High-Strength Carbon and Alloy Steel Nuts: ASTM A563M Class 10 \u0026amp; SAE J995 Grade 8.\u003cbr\u003eBenefits: Improved heat and oil resistance. Smooth operation and reduced wear.\u003cbr\u003eUpgraded High-Strength Alloy Steel Ball Joints: ASTM Salty Spray for Special Coating Treatment.\u003cbr\u003eUpgraded High-Strength Carbon Steel Housing: ASTM Salty Spray for 240 Hours.\u003c\/p\u003e\n\u003cp\u003eForged Ball Stud (SAE4140).\u003cbr\u003eSpecial Heat Treatment for Omin-directional Strength.\u003cbr\u003eTriple Lip Boot Seal.\u003cbr\u003eAnchored Bellows Boot Boot already installed on Ball Joint.\u003cbr\u003eSolid Steel Forging (SAE1045) For Double Strength.\u003cbr\u003eXRF Forged Ball Joints have almost double the Stud Pull-Out Rating of Competition.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eKit includes:\u003cbr\u003eQty 1 XTJ101P\u003cbr\u003eQty 1 XTJ102P\u003cbr\u003eQty 1 XTJ103P\u003cbr\u003eQty 1 XTJ104P\u003cbr\u003eQty 1 XTJ105\u003cbr\u003eQty 1 XTJ106\u003cbr\u003eQty 2 11-01116\u003cbr\u003eQty 2 11-01117\u003cbr\u003e\u003cbr\u003eReplaces DL112, 68258760AE\u003cbr\u003e\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":45339031929144,"sku":"XRF10PCJKIT","price":724.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XRF10PCJKIT.jpg?v=1749059944"},{"product_id":"hd-tie-rod-kit-20-25-wrangler","title":"XRF Heavy Duty Tie Rod Kit for 2018-2025 Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eXRFs 2.5 ton upgrade provides increased strength, durability, and improved steering response, almost tripling the durability. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eUpgraded Chloroprene Rubber Duster Covers: Anti-ozone Test, Heat and Oil Resistance.\u003cbr\u003eBenefits: Extended lifespan and reduced maintenance needs. Exceptional performance and reliability.\u003cbr\u003eUpgraded High-Strength Composite Material Bearings: Precision Design for High Durability.\u003cbr\u003ePremium Cohesion \u0026amp; Lubricity Grease: Pre-packed for Optimal Performance.\u003cbr\u003eBenefits: Unmatched strength and durability. Enhanced corrosion resistance.\u003cbr\u003eUpgraded High-Strength Carbon and Alloy Steel Nuts: ASTM A563M Class 10 \u0026amp; SAE J995 Grade 8.\u003cbr\u003eBenefits: Improved heat and oil resistance. Smooth operation and reduced wear.\u003cbr\u003eUpgraded High-Strength Alloy Steel Ball Joints: ASTM Salty Spray for Special Coating Treatment.\u003cbr\u003eUpgraded High-Strength Carbon Steel Housing: ASTM Salty Spray for 240 Hours.\u003c\/p\u003e\n\u003cp\u003eKit includes:\u003cbr\u003eQty 1 XTJ101P\u003cbr\u003eQty 1 XTJ102P\u003cbr\u003eQty 1 XTJ103P\u003cbr\u003eQty 1 XTJ104P\u003cbr\u003eQty 1 XTJ105\u003cbr\u003eQty 1 XTJ106\u003c\/p\u003e\n\u003cp\u003eReplaces XRFJTRK\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":45339315011896,"sku":"XTJKIT","price":599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XRFJTRK.jpg?v=1749059944"},{"product_id":"front-upper-control-16-23-durango","title":"XRF Maximum Series Front Upper Control Arm and Ball Joint, 2016-2023 Dodge Durango","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDodge Durango \u003c\/strong\u003e2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003eReduced Friction\u003cbr\u003eAs new car manufacturers move towards smaller lighter components such as power steering pumps the need for “Reduced Friction” steering parts increases. We design many features to give us the most ‘Reduced Friction” parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency.\u003cbr\u003e\u003cbr\u003eHighly Polished Studs\u003cbr\u003eXRF steering Parts are built like anti-friction bearings with very close tolerances and highly polished studs and bearings.\u003cbr\u003e\u003cbr\u003eSealed Boots\u003cbr\u003eXRF protective boots are made of “CR” compound rubber that is resistant to gasoline, oil, brake fluid, battery acid and road-level ozone. The boots are also anchored to the housing to ensure a tight seal and easy installation. The boots seal around the stud with a multi-lip seal. No other manufacturer gives you this kind of protection against contamination and loss of lubricant.\u003cbr\u003e\u003cbr\u003eAccordion Boots\u003cbr\u003eOn components with a high amplitude stud swings, XRF uses accordian style boots that are anchored at the base and multi-lip sealed at the stud to ensure that the boot will follow the stud for a positive seal.\u003cbr\u003e\u003cbr\u003eStep Threads\u003cbr\u003eWe use a very expensive step thread on all of our Ball Studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when when torqued it provides the strongest thread available.\u003cbr\u003e\u003cbr\u003eForged Steel Housings:\u003cbr\u003eIn order to achieve XRF’s demand for “Extreme Duty” parts, XRF has replaced all conventional metal stamping ball joint housings with heavy duty hot forged housings that allow us to increase the bearing area and double the stud pull-out strength.\u003cbr\u003e\u003cbr\u003eHigher Carbon Tempered Steel\u003cbr\u003eOur competitors generally use SAE 4118 mild steel (.17 carbon). XRF uses SAE1045 or SAE 4140 mid carbon steel (.43 carbon). Our competitors use mild steel because it is inexpensive and easy to work with. XRF uses mid-carbon steel for strength and heat treats for durability to produce a very robust long-life component.\u003cbr\u003e\u003cbr\u003eCNC Machining\u003cbr\u003eXRF uses Computer Numerically Controlled (CNC) milling equipment to make our parts dimensionally perfect. Every XRF part is made exactly to specifications with “Zero Tolerance ” variations. Our competitors cold forge their housings and allow large tolerances +\/- .008″ for die wear allowing the possibility of having some part fit too tightly and others to fit too loosely at the press fit diameter. There is never a complaint that XRF ball joints are too tight or too loose in the control arm.\u003cbr\u003e\u003cbr\u003eReplaces 68282328AA \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Armor Auto Parts","offers":[{"title":"Left Drivers","offer_id":50578884034872,"sku":"K623434","price":71.0,"currency_code":"USD","in_stock":true},{"title":"Right Passenger","offer_id":50578884067640,"sku":"K623433","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/K623434-1.jpg?v=1751418376"},{"product_id":"left-inner-tie-rod-end-20-25-gladiator","title":"XRF Platinum Series Left Drivers Side Inner Tie Rod End At Pitman Arm for 2020-2025 Jeep Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces# 68258760AE \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":50757010653496,"sku":"20-01112","price":37.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/20-01112.jpg?v=1752693910"},{"product_id":"right-lower-outer-tie-rod-end-20-25-gladiator","title":"XRF Platinum Series Right Passenger Side Lower Outer Tie Rod End for 2020-2025 Jeep Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003eDana M210 Corresponds to the Dana 44 front axle.\u003cbr\u003eDana M186 Corresponds to the Dana 30 front axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces# 68258771AE, 68309365AE, 68341993AF, 68258761AE \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Dana M210 Wide Front Axle","offer_id":50768780820792,"sku":"20-01113","price":169.1,"currency_code":"USD","in_stock":true},{"title":"Dana M210\/M186 Narrow Front Axle","offer_id":50768780853560,"sku":"20-01115","price":179.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/20-01113.jpg?v=1752694681"},{"product_id":"outer-tie-rod-end-20-25-gladiator","title":"XRF Platinum Series Left Drivers Side Outer Tie Rod End for 2020-2025 Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces# 68258768AE, 68258762AE \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":50773334491448,"sku":"20-01114","price":48.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/20-01114.jpg?v=1752694395"},{"product_id":"right-side-upper-outer-tie-rod-end-20-25-gladiator","title":"XRF Platinum Series Right Passenger Side Upper Outer Tie Rod End for 2020-2025 Jeep Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Stud Center To End: 904mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces# 68522995AA, 68522992AA, 68522997AB, 68522993AB \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Narrow, Stud Center To End: 904mm","offer_id":51881151824184,"sku":"XTR1339","price":161.5,"currency_code":"USD","in_stock":true},{"title":"Wide, Stud Center To End: 923mm","offer_id":51881151856952,"sku":"20-01111","price":125.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XTR1339.jpg?v=1752694928"},{"product_id":"adjusting-sleeve-20-25-gladiator","title":"XRF Platinum Series Tie Rod Adjusting Sleeve for 2020-2025 Jeep Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eReplaces# 68260466AB \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":50773445574968,"sku":"20-01110","price":26.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/20-01110.jpg?v=1752695044"},{"product_id":"passenger-side-inner-tie-rod-end-07-18-wrangler-jk","title":"XRF Platinum Series Right Passenger Side Inner Tie Rod End, Pitman Arm to Steering Assembly, 2007-2018 Jeep Wrangler JK","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JK \u003c\/strong\u003e2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2018\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e 2018 Model year is for the JK only, does not fit the JL\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces# 52060048AD, 52126058AD\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":50774833430840,"sku":"DS300005","price":72.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/DS300005.jpg?v=1752771823"},{"product_id":"right-outer-tie-rod-07-18-wrangler-jk","title":"XRF Platinum Series Right Passenger Side Outer Tie Rod End,2007-2018 Jeep Wrangler JK","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JK \u003c\/strong\u003e2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2018\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e 2018 Model year is for the JK only, does not fit the JL\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces# 52126113AE, V2060052AG, 52060052AG \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":50774930456888,"sku":"DS300043","price":110.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/DS300043.jpg?v=1752771978"},{"product_id":"adjusting-sleeve-pitman-arm-07-18-wrangler-jk","title":"XRF Platinum Series Tie Rod Adjusting Sleeve, Pitman Arm to Connecting Tie Rod, 2007-2018 Jeep Wrangler JK","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JK \u003c\/strong\u003e2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2018\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e 2018 Model year is for the JK only, does not fit the JL\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects.  \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eReplaces# 52126123AC, 52126122AC \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":50774936551736,"sku":"ES2012S","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/ES2012S.jpg?v=1752772135"},{"product_id":"inner-tie-rod-pitman-07-18-wrangler-jk","title":"XRF Titanium Series Inner Tie Rod End, At Pitman Arm, 2007-2018 Jeep Wrangler JK","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JK \u003c\/strong\u003e2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2018\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e 2018 Model year is for the JK only, does not fit the JL\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eUpgraded Chloroprene Rubber Duster Covers: Anti-ozone Test, Heat and Oil Resistance. Extended lifespan and reduced maintenance needs. Exceptional performance and reliability.\u003cbr\u003eUpgraded High-Strength Composite Material Bearings: Precision Design for High Durability.\u003cbr\u003ePremium Cohesion \u0026amp; Lubricity Grease: Pre-packed for Optimal Performance.\u003cbr\u003eUnmatched strength and durability. Enhanced corrosion resistance.\u003cbr\u003eUpgraded High-Strength Carbon and Alloy Steel Nuts: ASTM A563M Class 10 \u0026amp; SAE J995 Grade 8. Improved heat and oil resistance. Smooth operation and reduced wear.\u003cbr\u003eUpgraded High-Strength Alloy Steel Ball Joints: ASTM Salty Spray for Special Coating Treatment.\u003cbr\u003eUpgraded High-Strength Carbon Steel Housing: ASTM Salty Spray for 240 Hours. \u003c\/p\u003e\n\u003cp\u003eReplaces# 52060049AE\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":50774947529016,"sku":"XTR239P","price":39.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XTR239P.jpg?v=1752771500"},{"product_id":"left-outer-tie-rod-end-07-18-wrangler-jk","title":"XRF Titanium Series Left Driver Side Outer Tie Rod End, 2007-2018 Jeep Wrangler JK","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JK \u003c\/strong\u003e2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2018\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e 2018 Model year is for the JK only, does not fit the JL\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eUpgraded Chloroprene Rubber Duster Covers: Anti-ozone Test, Heat and Oil Resistance. Extended lifespan and reduced maintenance needs. Exceptional performance and reliability.\u003cbr\u003eUpgraded High-Strength Composite Material Bearings: Precision Design for High Durability.\u003cbr\u003ePremium Cohesion \u0026amp; Lubricity Grease: Pre-packed for Optimal Performance.\u003cbr\u003eUnmatched strength and durability. Enhanced corrosion resistance.\u003cbr\u003eUpgraded High-Strength Carbon and Alloy Steel Nuts: ASTM A563M Class 10 \u0026amp; SAE J995 Grade 8. Improved heat and oil resistance. Smooth operation and reduced wear.\u003cbr\u003eUpgraded High-Strength Alloy Steel Ball Joints: ASTM Salty Spray for Special Coating Treatment.\u003cbr\u003eUpgraded High-Strength Carbon Steel Housing: ASTM Salty Spray for 240 Hours. \u003c\/p\u003e\n\u003cp\u003eReplaces# 52126114AC, 52060053AE, V2060053AE \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":50774997270840,"sku":"XTR126P","price":44.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XTR126P.jpg?v=1752771653"},{"product_id":"tie-rod-adjusting-sleeve-07-18-wrangler-jk","title":"XRF Platinum Series Tie Rod Adjusting Sleeve, 2007-2018 Jeep Wrangler JK","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JK \u003c\/strong\u003e2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2018\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e 2018 Model year is for the JK only, does not fit the JL\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eReplaces# 52060054AB\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":50775040491832,"sku":"ES800983S","price":17.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/ES800983S-1.jpg?v=1752772251"},{"product_id":"ball-joints-07-18-wrangler-jk","title":"XRF Titanium Series Upper and Lower Ball Joints, 2007-2018 Jeep Wrangler JK","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JK \u003c\/strong\u003e2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2018\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e 2018 Model year is for the JK only, does not fit the JL\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eUpgraded Chloroprene Rubber Duster Covers: Anti-ozone Test, Heat and Oil Resistance.\u003cbr\u003eBenefits: Extended lifespan and reduced maintenance needs. Exceptional performance and reliability.\u003cbr\u003eUpgraded High-Strength Composite Material Bearings: Precision Design for High Durability.\u003cbr\u003ePremium Cohesion \u0026amp; Lubricity Grease: Pre-packed for Optimal Performance.\u003cbr\u003eBenefits: Unmatched strength and durability. Enhanced corrosion resistance.\u003cbr\u003eUpgraded High-Strength Carbon and Alloy Steel Nuts: ASTM A563M Class 10 \u0026amp; SAE J995 Grade 8.\u003cbr\u003eBenefits: Improved heat and oil resistance. Smooth operation and reduced wear.\u003cbr\u003eUpgraded High-Strength Alloy Steel Ball Joints: ASTM Salty Spray for Special Coating Treatment.\u003cbr\u003eUpgraded High-Strength Carbon Steel Housing: ASTM Salty Spray for 240 Hours.\u003c\/p\u003e\n\u003cp\u003eForged Ball Stud (SAE4140).\u003cbr\u003eSpecial Heat Treatment for Omin-directional Strength.\u003cbr\u003eTriple Lip Boot Seal.\u003cbr\u003eAnchored Bellows Boot Boot already installed on Ball Joint.\u003cbr\u003eSolid Steel Forging (SAE1045) For Double Strength.\u003cbr\u003eXRF Forged Ball Joints have almost double the Stud Pull-Out Rating of Competition.\u003c\/p\u003e\n\u003cp\u003eReplaces# \u003cspan id=\"partNo_68004085aa\" class=\"partNumCol\"\u003e68004085A\u003c\/span\u003e\u003c\/p\u003e","brand":"XRF","offers":[{"title":"(1) Upper Ball Joint","offer_id":50775181787448,"sku":"XBJ314P","price":36.48,"currency_code":"USD","in_stock":true},{"title":"(1) Lower Ball Joint","offer_id":50775181820216,"sku":"XBJ028P","price":38.4,"currency_code":"USD","in_stock":true},{"title":"(1) Upper and (1) Lower Ball Joint","offer_id":50775181852984,"sku":"XBJ314P\/XBJ028P","price":74.88,"currency_code":"USD","in_stock":true},{"title":"(2) Upper and (2) Lower Ball Joints","offer_id":50775181885752,"sku":"XBJ314P\/XBJ028P-2","price":149.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XBJ028P.jpg?v=1752696732"},{"product_id":"front-end-kit-07-18-wrangler-jk","title":"XRF Titanium\/Platinum Front End Kit, 2007-2018 Jeep Wrangler JK","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JK \u003c\/strong\u003e2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2018\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e 2018 Model year is for the JK only, does not fit the JL\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eUpgraded Chloroprene Rubber Duster Covers: Anti-ozone Test, Heat and Oil Resistance.\u003cbr\u003eBenefits: Extended lifespan and reduced maintenance needs. Exceptional performance and reliability.\u003cbr\u003eUpgraded High-Strength Composite Material Bearings: Precision Design for High Durability.\u003cbr\u003ePremium Cohesion \u0026amp; Lubricity Grease: Pre-packed for Optimal Performance.\u003cbr\u003eBenefits: Unmatched strength and durability. Enhanced corrosion resistance.\u003cbr\u003eUpgraded High-Strength Carbon and Alloy Steel Nuts: ASTM A563M Class 10 \u0026amp; SAE J995 Grade 8.\u003cbr\u003eBenefits: Improved heat and oil resistance. Smooth operation and reduced wear.\u003cbr\u003eUpgraded High-Strength Alloy Steel Ball Joints: ASTM Salty Spray for Special Coating Treatment.\u003cbr\u003eUpgraded High-Strength Carbon Steel Housing: ASTM Salty Spray for 240 Hours.\u003c\/p\u003e\n\u003cp\u003eForged Ball Stud (SAE4140).\u003cbr\u003eSpecial Heat Treatment for Omin-directional Strength.\u003cbr\u003eTriple Lip Boot Seal.\u003cbr\u003eAnchored Bellows Boot Boot already installed on Ball Joint.\u003cbr\u003eSolid Steel Forging (SAE1045) For Double Strength.\u003cbr\u003eXRF Forged Ball Joints have almost double the Stud Pull-Out Rating of Competition.\u003c\/p\u003e\n\u003cp\u003eTie Rod Kit Includes\u003cbr\u003eQty 1 XTR239P Titanium Series\u003cbr\u003eQty 1 XTR126P Titanium Series\u003cbr\u003eQty 1 DS300005 Platinum Series\u003cbr\u003eQty 1 DS300043 Platinum Series\u003cbr\u003eQty 1 ES2012S Platinum Series\u003cbr\u003eQty 1 ES800983S Platinum Series\u003c\/p\u003e\n\u003cp\u003eTie Rod Kit with Ball Joints Includes\u003cbr\u003eQty 1 XTR239P Titanium Series\u003cbr\u003eQty 1 XTR126P Titanium Series\u003cbr\u003eQty 1 DS300005 Platinum Series\u003cbr\u003eQty 1 DS300043 Platinum Series\u003cbr\u003eQty 1 ES2012S Platinum Series\u003cbr\u003eQty 1 ES800983S Platinum Series\u003cbr\u003eQty 2 XBJ314P Titanium Series\u003cbr\u003eQty 2 XBJ028P Titanium Series\u003c\/p\u003e","brand":"XRF","offers":[{"title":"6 Piece Tie Rod Kit","offer_id":50783030968632,"sku":"XRF6PCJKKIT","price":299.95,"currency_code":"USD","in_stock":true},{"title":"10 Piece Tie Rod Kit with Ball Joints","offer_id":50783031001400,"sku":"XRF10PCJKKIT","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XRF6PCJKKIT.jpg?v=1752774619"},{"product_id":"lower-control-arm-20-25-gladiator","title":"XRF Maximum Series Front Lower Control Arm for 2020-2025 Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Fits both Left Driver Side and Right Passenger Side\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eReplaces# 68567808AA \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":50824146420024,"sku":"K643707","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/K643707.jpg?v=1753370748"},{"product_id":"front-upper-control-arm-20-25-gladiator","title":"XRF Maximum Series Front Upper Control Arm for 2020-2025 Jeep Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eReplaces# 68461229AA, 68453187AA, \u003cspan id=\"partNo_68461228aa\" class=\"partNumCol\"\u003e68461228AA\u003c\/span\u003e, \u003cspan id=\"partNo_68453186aa\" class=\"partNumCol\"\u003e68453186AA \u003c\/span\u003e\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Left Driver Side","offer_id":50824274510136,"sku":"K643729","price":42.6,"currency_code":"USD","in_stock":true},{"title":"Right Passenger Side","offer_id":50824274542904,"sku":"K643730","price":42.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/K643729.jpg?v=1753370542"},{"product_id":"stabilizer-bar-20-25-gladiator","title":"XRF Platinum Series Stabilizer Bar Link for 2020-2025 Jeep Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Fits both Left Driver Side and Right Passenger Side\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003eForged Ball Stud (SAE4140).\u003cbr\u003eSpecial Heat Treatment for Omin-directional Strength.\u003cbr\u003eTriple Lip Boot Seal.\u003cbr\u003eAnchored Bellows Boot Boot already installed on Ball Joint.\u003cbr\u003eSolid Steel Forging (SAE1045) For Double Strength.\u003cbr\u003eXRF Forged Ball Joints have almost double the Stud Pull-Out Rating of Competition.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces# \u003cspan class=\"partNumCol\" id=\"partNo_68293033ac\"\u003e68293033A, \u003cspan class=\"partNumCol\" id=\"partNo_68533954aa\"\u003e68533954A, 68361275AC\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Front","offer_id":50824347156792,"sku":"K700908","price":27.9,"currency_code":"USD","in_stock":true},{"title":"Rear","offer_id":50824347189560,"sku":"K750938","price":29.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/K700908.jpg?v=1753370212"},{"product_id":"rear-control-arm-20-25-gladiator","title":"XRF Maximum Series Rear Control Trailing Arm for 2020-2025 Jeep Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Fits both Left Driver Side and Right Passenger Side\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eReplaces# 68567808AA \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Lower","offer_id":50824510046520,"sku":"XTB387","price":56.7,"currency_code":"USD","in_stock":true},{"title":"Upper","offer_id":50824510079288,"sku":"XTB395","price":45.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XTB387.jpg?v=1753369908"},{"product_id":"rear-tension-link-11-24-dodge-durango","title":"XRF Maximum Series Rear Upper Front Control Arm Tension Link, 2011-2024 Dodge Durango","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDodge Durango \u003c\/strong\u003e2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Fits both Left Driver Side and Right Passenger Side\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReduced Friction\u003cbr\u003eAs new car manufacturers move towards smaller lighter components such as power steering pumps the need for “Reduced Friction” steering parts increases. We design many features to give us the most ‘Reduced Friction” parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency.\u003cbr\u003e\u003cbr\u003eHighly Polished Studs\u003cbr\u003eXRF steering Parts are built like anti-friction bearings with very close tolerances and highly polished studs and bearings.\u003cbr\u003e\u003cbr\u003eSealed Boots\u003cbr\u003eXRF protective boots are made of “CR” compound rubber that is resistant to gasoline, oil, brake fluid, battery acid and road-level ozone. The boots are also anchored to the housing to ensure a tight seal and easy installation. The boots seal around the stud with a multi-lip seal. No other manufacturer gives you this kind of protection against contamination and loss of lubricant.\u003cbr\u003e\u003cbr\u003eAccordion Boots\u003cbr\u003eOn components with a high amplitude stud swings, XRF uses accordian style boots that are anchored at the base and multi-lip sealed at the stud to ensure that the boot will follow the stud for a positive seal.\u003cbr\u003e\u003cbr\u003eStep Threads\u003cbr\u003eWe use a very expensive step thread on all of our Ball Studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when when torqued it provides the strongest thread available.\u003cbr\u003e\u003cbr\u003eForged Steel Housings:\u003cbr\u003eIn order to achieve XRF’s demand for “Extreme Duty” parts, XRF has replaced all conventional metal stamping ball joint housings with heavy duty hot forged housings that allow us to increase the bearing area and double the stud pull-out strength.\u003cbr\u003e\u003cbr\u003eHigher Carbon Tempered Steel\u003cbr\u003eOur competitors generally use SAE 4118 mild steel (.17 carbon). XRF uses SAE1045 or SAE 4140 mid carbon steel (.43 carbon). Our competitors use mild steel because it is inexpensive and easy to work with. XRF uses mid-carbon steel for strength and heat treats for durability to produce a very robust long-life component.\u003cbr\u003e\u003cbr\u003eCNC Machining\u003cbr\u003eXRF uses Computer Numerically Controlled (CNC) milling equipment to make our parts dimensionally perfect. Every XRF part is made exactly to specifications with “Zero Tolerance ” variations. Our competitors cold forge their housings and allow large tolerances +\/- .008″ for die wear allowing the possibility of having some part fit too tightly and others to fit too loosely at the press fit diameter. There is never a complaint that XRF ball joints are too tight or too loose in the control arm.\u003cbr\u003e\u003cbr\u003eReplaces# \u003cspan id=\"partNo_52124830ad\" class=\"partNumCol\"\u003e52124830AD\u003c\/span\u003e\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":50832837247288,"sku":"K642636","price":38.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/K642636.jpg?v=1753369709"},{"product_id":"rear-camber-link-11-24-dodge-durango","title":"XRF Maximum Series Rear Upper rear Control Arm Camber Link, 2011-2024 Dodge Durango","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDodge Durango \u003c\/strong\u003e2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Standard Suspension\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReduced Friction\u003cbr\u003eAs new car manufacturers move towards smaller lighter components such as power steering pumps the need for “Reduced Friction” steering parts increases. We design many features to give us the most ‘Reduced Friction” parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency.\u003cbr\u003e\u003cbr\u003eHighly Polished Studs\u003cbr\u003eXRF steering Parts are built like anti-friction bearings with very close tolerances and highly polished studs and bearings.\u003cbr\u003e\u003cbr\u003eSealed Boots\u003cbr\u003eXRF protective boots are made of “CR” compound rubber that is resistant to gasoline, oil, brake fluid, battery acid and road-level ozone. The boots are also anchored to the housing to ensure a tight seal and easy installation. The boots seal around the stud with a multi-lip seal. No other manufacturer gives you this kind of protection against contamination and loss of lubricant.\u003cbr\u003e\u003cbr\u003eAccordion Boots\u003cbr\u003eOn components with a high amplitude stud swings, XRF uses accordian style boots that are anchored at the base and multi-lip sealed at the stud to ensure that the boot will follow the stud for a positive seal.\u003cbr\u003e\u003cbr\u003eStep Threads\u003cbr\u003eWe use a very expensive step thread on all of our Ball Studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when when torqued it provides the strongest thread available.\u003cbr\u003e\u003cbr\u003eForged Steel Housings:\u003cbr\u003eIn order to achieve XRF’s demand for “Extreme Duty” parts, XRF has replaced all conventional metal stamping ball joint housings with heavy duty hot forged housings that allow us to increase the bearing area and double the stud pull-out strength.\u003cbr\u003e\u003cbr\u003eHigher Carbon Tempered Steel\u003cbr\u003eOur competitors generally use SAE 4118 mild steel (.17 carbon). XRF uses SAE1045 or SAE 4140 mid carbon steel (.43 carbon). Our competitors use mild steel because it is inexpensive and easy to work with. XRF uses mid-carbon steel for strength and heat treats for durability to produce a very robust long-life component.\u003cbr\u003e\u003cbr\u003eCNC Machining\u003cbr\u003eXRF uses Computer Numerically Controlled (CNC) milling equipment to make our parts dimensionally perfect. Every XRF part is made exactly to specifications with “Zero Tolerance ” variations. Our competitors cold forge their housings and allow large tolerances +\/- .008″ for die wear allowing the possibility of having some part fit too tightly and others to fit too loosely at the press fit diameter. There is never a complaint that XRF ball joints are too tight or too loose in the control arm.\u003cbr\u003e\u003cbr\u003eReplaces# 68253180AA, 68253181AA, 52124820AC, 52124821AC \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Left Driver Side","offer_id":50832882073912,"sku":"K642926","price":30.1,"currency_code":"USD","in_stock":true},{"title":"Right Passenger Side","offer_id":50832882106680,"sku":"K642770","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/K642926.jpg?v=1753369061"},{"product_id":"front-control-arm-bushing-11-24-dodge-durango","title":"XRF Platinum Series Front Control Arm Bushing, 2011-2024 Dodge Durango","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDodge Durango \u003c\/strong\u003e2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Fits both Left Driver Side and Right Passenger Side\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects.  \u003c\/p\u003e\n\u003cp\u003eReduced Friction\u003cbr\u003eAs new car manufacturers move towards smaller lighter components such as power steering pumps the need for “Reduced Friction” steering parts increases. We design many features to give us the most ‘Reduced Friction” parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency.\u003cbr\u003e\u003cbr\u003eReplaces 68282328AA \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Upper","offer_id":50832936894776,"sku":"K201338","price":14.0,"currency_code":"USD","in_stock":true},{"title":"Lower - Smaller Bushing","offer_id":50832936927544,"sku":"K201261","price":19.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/K201338.jpg?v=1753368863"},{"product_id":"inner-tie-rod-end-16-24-dodge-durango","title":"XRF Platinum Series Inner Tie Rod End, 2016-2024 Dodge Durango with Electric Steering","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDodge Durango \u003c\/strong\u003e2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Fits both Left Driver Side and Right Passenger Side\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces# 68424439AA\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":50832993845560,"sku":"XRE734","price":25.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XRE734.jpg?v=1753368552"},{"product_id":"outer-tie-rod-end-26-24-dodge-durango","title":"XRF Platinum Series Outer Tie Rod End, 2016-2024 Dodge Durango","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDodge Durango \u003c\/strong\u003e2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces# 68303631AA, 68303630AA  \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Left Driver Side","offer_id":50833015963960,"sku":"XTR1155","price":36.9,"currency_code":"USD","in_stock":true},{"title":"Right Passenger Side","offer_id":50833015996728,"sku":"XTR1154","price":36.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XTR1155.jpg?v=1753272662"},{"product_id":"tie-rod-end-kit-16-24-dodge-durango","title":"XRF Platinum Series Tie Rod End Kit, 2016-2024 Dodge Durango with Electric Steering","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDodge Durango \u003c\/strong\u003e2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects.  \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTie Rod Kit Includes\u003cbr\u003eQty 1 XTR1155\u003cbr\u003eQty 1 XTR1154\u003cbr\u003eQty 2 XRE734\u003c\/p\u003e\n\u003cp\u003eReplaces# 68303631AA, 68303630AA , 68303631AA, 68303630AA\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":50833050861880,"sku":"XR4PCDDKIT","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XR4PCDDKIT.jpg?v=1753377965"},{"product_id":"ball-joints-20-25-gladiator","title":"XRF Platinum Series Upper and Lower Ball Joints for Jeep 2020-2025 Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003eForged Ball Stud (SAE4140).\u003cbr\u003eSpecial Heat Treatment for Omin-directional Strength.\u003cbr\u003eTriple Lip Boot Seal.\u003cbr\u003eAnchored Bellows Boot Boot already installed on Ball Joint.\u003cbr\u003eSolid Steel Forging (SAE1045) For Double Strength.\u003cbr\u003eXRF Forged Ball Joints have almost double the Stud Pull-Out Rating of Competition.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces# 68531030AB\u003c\/p\u003e","brand":"XRF","offers":[{"title":"(1) Upper Ball Joint","offer_id":51330346320184,"sku":"11-01116","price":35.0,"currency_code":"USD","in_stock":true},{"title":"(1) Lower Ball Joint","offer_id":51330346352952,"sku":"11-01117","price":25.0,"currency_code":"USD","in_stock":true},{"title":"(1) Upper and (1) Lower Ball Joint","offer_id":51330346385720,"sku":"11-01115","price":60.2,"currency_code":"USD","in_stock":true},{"title":"(2) Upper and (2) Lower Ball Joints","offer_id":51330346418488,"sku":"11-01115-2","price":120.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/11-01115.jpg?v=1751412129"},{"product_id":"hd-tie-rod-kit-20-25-gladiator","title":"XRF Heavy Duty Tie Rod Kit for 2020-2025 Jeep Gladiator JT","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGladiator JT \u003c\/strong\u003e2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eXRFs 2.5 ton upgrade provides increased strength, durability, and improved steering response, almost tripling the durability. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eUpgraded Chloroprene Rubber Duster Covers: Anti-ozone Test, Heat and Oil Resistance.\u003cbr\u003eBenefits: Extended lifespan and reduced maintenance needs. Exceptional performance and reliability.\u003cbr\u003eUpgraded High-Strength Composite Material Bearings: Precision Design for High Durability.\u003cbr\u003ePremium Cohesion \u0026amp; Lubricity Grease: Pre-packed for Optimal Performance.\u003cbr\u003eBenefits: Unmatched strength and durability. Enhanced corrosion resistance.\u003cbr\u003eUpgraded High-Strength Carbon and Alloy Steel Nuts: ASTM A563M Class 10 \u0026amp; SAE J995 Grade 8.\u003cbr\u003eBenefits: Improved heat and oil resistance. Smooth operation and reduced wear.\u003cbr\u003eUpgraded High-Strength Alloy Steel Ball Joints: ASTM Salty Spray for Special Coating Treatment.\u003cbr\u003eUpgraded High-Strength Carbon Steel Housing: ASTM Salty Spray for 240 Hours.\u003c\/p\u003e\n\u003cp\u003eKit includes:\u003cbr\u003eQty 1 XTJ101P\u003cbr\u003eQty 1 XTJ102P\u003cbr\u003eQty 1 XTJ103P\u003cbr\u003eQty 1 XTJ104P\u003cbr\u003eQty 1 XTJ105\u003cbr\u003eQty 1 XTJ106\u003c\/p\u003e\n\u003cp\u003eReplaces XRFJTRK\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":51330388295992,"sku":"XTJKIT","price":599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XRFJTRK.jpg?v=1749059944"},{"product_id":"xrf-heavy-duty-upper-right-passenger-side-outer-tie-rod-end-18-25-wrangler","title":"XRF Heavy Duty Upper Right Passenger Side Outer Tie Rod End for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eXRFs 2.5 ton upgrade provides increased strength, durability, and improved steering response, almost tripling the durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eUpgraded Chloroprene Rubber Duster Covers: Anti-ozone Test, Heat and Oil Resistance.\u003cbr\u003eBenefits: Extended lifespan and reduced maintenance needs. Exceptional performance and reliability.\u003cbr\u003eUpgraded High-Strength Composite Material Bearings: Precision Design for High Durability.\u003cbr\u003ePremium Cohesion \u0026amp; Lubricity Grease: Pre-packed for Optimal Performance.\u003cbr\u003eBenefits: Unmatched strength and durability. Enhanced corrosion resistance.\u003cbr\u003eUpgraded High-Strength Carbon and Alloy Steel Nuts: ASTM A563M Class 10 \u0026amp; SAE J995 Grade 8.\u003cbr\u003eBenefits: Improved heat and oil resistance. Smooth operation and reduced wear.\u003cbr\u003eUpgraded High-Strength Alloy Steel Ball Joints: ASTM Salty Spray for Special Coating Treatment.\u003cbr\u003eUpgraded High-Strength Carbon Steel Housing: ASTM Salty Spray for 240 Hours.\u003c\/p\u003e\n\u003cp\u003eReplaces TR181, 68522992AA, 68522995AA\u003cbr\u003e\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":51330408120632,"sku":"XTJ101P","price":93.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/products\/XTJ101P.jpg?v=1744387859"},{"product_id":"xrf-heavy-duty-left-driver-side-inner-tie-rod-end-18-25-wrangler","title":"XRF Heavy Duty Left Driver Side Inner Tie Rod End for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eXRFs 2.5 ton upgrade provides increased strength, durability, and improved steering response, almost tripling the durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eUpgraded Chloroprene Rubber Duster Covers: Anti-ozone Test, Heat and Oil Resistance.\u003cbr\u003eBenefits: Extended lifespan and reduced maintenance needs. Exceptional performance and reliability.\u003cbr\u003eUpgraded High-Strength Composite Material Bearings: Precision Design for High Durability.\u003cbr\u003ePremium Cohesion \u0026amp; Lubricity Grease: Pre-packed for Optimal Performance.\u003cbr\u003eBenefits: Unmatched strength and durability. Enhanced corrosion resistance.\u003cbr\u003eUpgraded High-Strength Carbon and Alloy Steel Nuts: ASTM A563M Class 10 \u0026amp; SAE J995 Grade 8.\u003cbr\u003eBenefits: Improved heat and oil resistance. Smooth operation and reduced wear.\u003cbr\u003eUpgraded High-Strength Alloy Steel Ball Joints: ASTM Salty Spray for Special Coating Treatment.\u003cbr\u003eUpgraded High-Strength Carbon Steel Housing: ASTM Salty Spray for 240 Hours.\u003c\/p\u003e\n\u003cp\u003eReplaces DL112, 68258760AE\u003cbr\u003e\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":51330410479928,"sku":"XTJ102P","price":63.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/products\/XTJ102P.jpg?v=1744387084"},{"product_id":"xrf-maximum-series-rear-control-trailing-arm-18-25-wrangler","title":"XRF Maximum Series Rear Control Trailing Arm for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Fits both Left Driver Side and Right Passenger Side\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eReplaces# 68567808AA \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Lower","offer_id":51330412773688,"sku":"XTB387","price":56.7,"currency_code":"USD","in_stock":true},{"title":"Upper","offer_id":51330412806456,"sku":"XTB395","price":45.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XTB387.jpg?v=1753369908"},{"product_id":"stabilizer-bar-link-18-25-wrangler","title":"XRF Platinum Series Stabilizer Bar Link for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Fits both Left Driver Side and Right Passenger Side\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003eForged Ball Stud (SAE4140).\u003cbr\u003eSpecial Heat Treatment for Omin-directional Strength.\u003cbr\u003eTriple Lip Boot Seal.\u003cbr\u003eAnchored Bellows Boot Boot already installed on Ball Joint.\u003cbr\u003eSolid Steel Forging (SAE1045) For Double Strength.\u003cbr\u003eXRF Forged Ball Joints have almost double the Stud Pull-Out Rating of Competition.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces# \u003cspan class=\"partNumCol\" id=\"partNo_68293033ac\"\u003e68293033A, \u003cspan class=\"partNumCol\" id=\"partNo_68533954aa\"\u003e68533954A, 68361275AC\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Front","offer_id":51330415362360,"sku":"K700908","price":27.9,"currency_code":"USD","in_stock":true},{"title":"Rear","offer_id":51330415395128,"sku":"K750938","price":29.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/K700908.jpg?v=1753370212"},{"product_id":"front-upper-control-arm-18-25-wrangler","title":"XRF Maximum Series Front Upper Control Arm for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eReplaces# 68461229AA, 68453187AA, \u003cspan id=\"partNo_68461228aa\" class=\"partNumCol\"\u003e68461228AA\u003c\/span\u003e, \u003cspan id=\"partNo_68453186aa\" class=\"partNumCol\"\u003e68453186AA \u003c\/span\u003e\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Left Driver Side","offer_id":51330420769080,"sku":"K643729","price":42.6,"currency_code":"USD","in_stock":true},{"title":"Right Passenger Side","offer_id":51330420801848,"sku":"K643730","price":42.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/K643729.jpg?v=1753370542"},{"product_id":"front-lower-control-arm-18-25-wrangler","title":"XRF Maximum Series Front Lower Control Arm for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Fits both Left Driver Side and Right Passenger Side\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eReplaces# 68567808AA \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":51330425880888,"sku":"K643707","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/K643707.jpg?v=1753370748"},{"product_id":"adjusting-sleeve-18-25-wrangler","title":"XRF Platinum Series Tie Rod Adjusting Sleeve for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eReplaces# 68260466AB \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":51330435612984,"sku":"20-01110","price":26.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/20-01110.jpg?v=1752695044"},{"product_id":"right-passenger-side-upper-outer-tie-rod-end-18-25-wrangler-jl","title":"XRF Platinum Series Right Passenger Side Upper Outer Tie Rod End for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Stud Center To End: 904mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces# 68522995AA, 68522992AA, 68522997AB, 68522993AB \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Narrow, Stud Center To End: 904mm","offer_id":51881152086328,"sku":"XTR1339","price":161.5,"currency_code":"USD","in_stock":true},{"title":"Wide, Stud Center To End: 923mm","offer_id":51881152119096,"sku":"20-01111","price":125.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XTR1339.jpg?v=1752694928"},{"product_id":"left-drivers-side-outer-tie-rod-end-18-25-wrangler-jl","title":"XRF Platinum Series Left Drivers Side Outer Tie Rod End for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces# 68258768AE, 68258762AE \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":51330457993528,"sku":"20-01114","price":48.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/20-01114.jpg?v=1752694395"},{"product_id":"right-passenger-side-lower-outer-tie-rod-end-18-25-wrangler-jl","title":"XRF Platinum Series Right Passenger Side Lower Outer Tie Rod End for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003eDana M210 Corresponds to the Dana 44 front axle.\u003cbr\u003eDana M186 Corresponds to the Dana 30 front axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces# 68258771AE, 68309365AE, 68341993AF, 68258761AE \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Dana M210 Wide Front Axle","offer_id":51330458779960,"sku":"20-01113","price":169.1,"currency_code":"USD","in_stock":true},{"title":"Dana M210\/M186 Narrow Front Axle","offer_id":51330458812728,"sku":"20-01115","price":179.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/20-01113.jpg?v=1752694681"},{"product_id":"drivers-side-inner-tie-rod-end-at-pitman-arm-18-25-wrangler-jl","title":"XRF Platinum Series Left Drivers Side Inner Tie Rod End At Pitman Arm for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eChloroprene Rubber Duster Covers: Sealed Boots \u0026amp; Accordion Boots.\u003cbr\u003eHigh-Strength Composite Material Bearings: The Load Covers The Entire Bearing Surface.\u003cbr\u003ePre-Threaded Grease Zerk Housing: Pre-packed with Grease.\u003cbr\u003eHigh-Strength Carbon and Alloy Steel Nuts: Grade 8-10.\u003cbr\u003eHigh-Strength Alloy Steel Ball Stud: Precision Heat Treated.\u003cbr\u003eHigh-Strength Carbon Steel Housing: Precisions CNC Housing, Heat Treated Carbon Steel \u0026amp; Anti-Corrosive.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces# 68258760AE \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":51330461991224,"sku":"20-01112","price":37.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/20-01112.jpg?v=1752693910"},{"product_id":"xrf-10-piece-heavy-duty-front-end-kit-18-25-wrangler-jl","title":"XRF 10 Piece Heavy Duty Front End Kit for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eXRFs 2.5 ton upgrade provides increased strength, durability, and improved steering response, almost tripling the durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eUpgraded Chloroprene Rubber Duster Covers: Anti-ozone Test, Heat and Oil Resistance.\u003cbr\u003eBenefits: Extended lifespan and reduced maintenance needs. Exceptional performance and reliability.\u003cbr\u003eUpgraded High-Strength Composite Material Bearings: Precision Design for High Durability.\u003cbr\u003ePremium Cohesion \u0026amp; Lubricity Grease: Pre-packed for Optimal Performance.\u003cbr\u003eBenefits: Unmatched strength and durability. Enhanced corrosion resistance.\u003cbr\u003eUpgraded High-Strength Carbon and Alloy Steel Nuts: ASTM A563M Class 10 \u0026amp; SAE J995 Grade 8.\u003cbr\u003eBenefits: Improved heat and oil resistance. Smooth operation and reduced wear.\u003cbr\u003eUpgraded High-Strength Alloy Steel Ball Joints: ASTM Salty Spray for Special Coating Treatment.\u003cbr\u003eUpgraded High-Strength Carbon Steel Housing: ASTM Salty Spray for 240 Hours.\u003c\/p\u003e\n\u003cp\u003eForged Ball Stud (SAE4140).\u003cbr\u003eSpecial Heat Treatment for Omin-directional Strength.\u003cbr\u003eTriple Lip Boot Seal.\u003cbr\u003eAnchored Bellows Boot Boot already installed on Ball Joint.\u003cbr\u003eSolid Steel Forging (SAE1045) For Double Strength.\u003cbr\u003eXRF Forged Ball Joints have almost double the Stud Pull-Out Rating of Competition.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eKit includes:\u003cbr\u003eQty 1 XTJ101P\u003cbr\u003eQty 1 XTJ102P\u003cbr\u003eQty 1 XTJ103P\u003cbr\u003eQty 1 XTJ104P\u003cbr\u003eQty 1 XTJ105\u003cbr\u003eQty 1 XTJ106\u003cbr\u003eQty 2 11-01116\u003cbr\u003eQty 2 11-01117\u003cbr\u003e\u003cbr\u003eReplaces DL112, 68258760AE\u003cbr\u003e\u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":51330462908728,"sku":"XRF10PCJKIT","price":724.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XRF10PCJKIT.jpg?v=1749059944"},{"product_id":"front-lower-adjusting-sleeve-18-25-wrangler","title":"XRF Heavy Duty Aluminum Front Lower Adjusting Sleeve for 2018-2025 Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eXRFs 2.5 ton upgrade provides increased strength, durability, and improved steering response, almost tripling the durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eReplaces DL114, 68309365AE, 68258761AE \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":51330464874808,"sku":"XTJ106","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XTJ106.jpg?v=1744376073"},{"product_id":"adjusting-sleeve-18-2025-wrangler","title":"XRF Heavy Duty Aluminum Front Upper Adjusting Sleeve for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eXRFs 2.5 ton upgrade provides increased strength, durability, and improved steering response, almost tripling the durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eReplaces TR184, 68522992AA, 68522995AA \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":51330468380984,"sku":"XTJ105","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XTJ105.jpg?v=1744376932"},{"product_id":"outer-tie-rod-end-18-25-wrangler","title":"XRF Heavy Duty Left Driver Side Outer Tie Rod End for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWrangler JL \u003c\/strong\u003e2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eXRFs 2.5 ton upgrade provides increased strength, durability, and improved steering response, almost tripling the durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStep up to XRF's Legendary Durability. Do not waste time and money on inferior parts. Do it once and do it right with XRF. Includes a Million-Mile Limited Lifetime Warranty to the original purchaser. Warranty is limited to normal wear and tear and manufacture defects.   \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety - Durability - Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery XRF part is made exactly to specifications with “zero tolerance” variations. Our competitors cold forge their shells and allow large tolerances for die wear allowing the possibility to have some parts too tight and others fit too loosely at the press fit diameter.\u003c\/p\u003e\n\u003cp\u003eThese parts are built like anti-friction bearings with close tolerances and highly polished studs. Using high strength step thread on all the ball studs and nuts. This is a matched thread that allows the installer to spin the nut on by hand but when torqued, it provides the strongest thread available.\u003c\/p\u003e\n\u003cp\u003eXRF’s hot forging process improves the mechanical properties of the metal. This efficiency is particularly important when working with expensive materials, such high-grade steel. It also provides excellent consistency and repeatability in the production of parts. The hot forging process reduced waste generation also contributes to lower environmental impact.\u003c\/p\u003e\n\u003cp\u003eXRF uses many features to give us the most ‘Reduced Friction’ parts on the market. This all adds up to smoother steering, better handling and increased fuel efficiency. In addition, XRF had added many installer focused features aimed at reducing install times.\u003c\/p\u003e\n\u003cp\u003eProtective boots are made of “CR” compound rubber that is resistant to oil, grease, brake fluid, battery acid and road-level ozone. The boots seal around the stud with multi-lip seal also anchored to the housing to ensure a tight seal and easy installation.\u003c\/p\u003e\n\u003cp\u003eUpgraded Chloroprene Rubber Duster Covers: Anti-ozone Test, Heat and Oil Resistance.\u003cbr\u003eBenefits: Extended lifespan and reduced maintenance needs. Exceptional performance and reliability.\u003cbr\u003eUpgraded High-Strength Composite Material Bearings: Precision Design for High Durability.\u003cbr\u003ePremium Cohesion \u0026amp; Lubricity Grease: Pre-packed for Optimal Performance.\u003cbr\u003eBenefits: Unmatched strength and durability. Enhanced corrosion resistance.\u003cbr\u003eUpgraded High-Strength Carbon and Alloy Steel Nuts: ASTM A563M Class 10 \u0026amp; SAE J995 Grade 8.\u003cbr\u003eBenefits: Improved heat and oil resistance. Smooth operation and reduced wear.\u003cbr\u003eUpgraded High-Strength Alloy Steel Ball Joints: ASTM Salty Spray for Special Coating Treatment.\u003cbr\u003eUpgraded High-Strength Carbon Steel Housing: ASTM Salty Spray for 240 Hours.\u003c\/p\u003e\n\u003cp\u003eReplaces DL111, 68258762AE \u003c\/p\u003e","brand":"XRF","offers":[{"title":"Default Title","offer_id":51330469331256,"sku":"XTJ104P","price":93.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/files\/XTJ104P.jpg?v=1744378365"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/0277\/1534\/collections\/Slide4.jpg?v=1762805090","url":"https:\/\/armorautoparts.com\/collections\/xrf.oembed?page=6","provider":"Armor Auto Parts","version":"1.0","type":"link"}